ATEX & Exd IIC
Sunday, 5 February 2012
ES-M18 - D.P.C.O. / D.P.D.T. Proximity Switch for Zone 0
see ATEX M18 Datasheets
PDF DatasheetInstructions
Simple apparatus proximity switches from Euroswitch are suitable for intrinsically safe circuits for use in arduous and hazardous Zone 0 applications.
These switches are produced using the same technology, components and production methods as our ATEX EExd IIC T6 sensors.
This Double Pole Change Over / Double Pole Double Throw switch is made from high impact, low smoke and fume, glass filled nylon, and is supplied with six separate insulated leads offering D.P.C.O. volt free outputs.
Summary Information
Intrinsically Safe M18
D.P.C.O. / D.P.D.T.
Proximity Switch
| Switch Body | High Impact, Low Smoke & Fume, Glass Filled Nylon |
|---|---|
| Switch Type | Double Pole Change Over (D.P.C.O.) Double Pole Double Throw (D.P.D.T.) |
| Contacts | Rhodium |
| Cable | 400mm PVC Leads |
| Sealed | Hermetically to IP68 |
| Operating Temp | -20°c to +80°c |
Ratings
| Contacts | Max. Current | Max. Volts | Power Watts | Sensing Range in mm * | ||||||
|---|---|---|---|---|---|---|---|---|---|---|
| D.P.C.O. / D.P.D.T | 24v DC 830mA 110v AC 180mA |
150v AC 150v DC |
20W. VA |
|
||||||
| * Switches should be mounted on non-ferrous materials otherwise sensing ranges will be reduced! | ||||||||||
Dimensions
Connections
Classification - Simple Apparatus
Suitable for use in I.S. (Intrinsically Safe) circuits when supplied through a certified barrier. As per EN 60079-11 (2007) section 5-7 simple apparatus